Built-in Dishwasher VATTI DWID3 (AG Grey)
RM7,799.00 MYR
SKU VT-0400B
Details
A built-in dishwasher with automatic detergent dosing, high-temperature washing, hot-air drying and UVC treatment. Its large tub accommodates family loads, with dedicated programmes for produce and delicate items.
Specifications
| Place settings | 20 |
|---|---|
| Wash programs | 6 |
| Wash pressure | 55,000 Pa |
- Smart Wash, Fruit & Veg Wash, Independent Dry, Power Wash, Standard Wash, Eco Wash
- 4 app programs: Glass Care 60°C, Intensive 70°C, Toy Care 50°C, Self Clean 65°C
- 6 additional functions: UV, Smart Dosing, Extra Wash, Half Load Upper, Half Load Lower, 24-hour delay
- BLDC motor
- 150 L cavity, three-level rack with pull-out cutlery tray
- Dual telescopic spray arms, square full-coverage wash
- 75°C high temperature washing
- 105°C independent hot air drying
- UVC sterilisation, up to 99.9%
- 168 hours air ventilation, 7-day fresh storage
- Smart detergent dosing, 250 ml reservoir, about two weeks a fill
- Patented 3-way air circulation
- Patented dual pump, zero residual water
- Automatic drain seal
- Self-cleaning three-layer filter
- 23 inch full touch colour display, set at 20°
- Wi-Fi app control
- Rated power 1,750 W, 220 to 240 V
Dimensions and installation
The appliance
| Width | 598 mm |
|---|---|
| Height | 775 mm (675 mm of door over a 100 mm plinth; the feet adjust 0 to 40 mm) |
| Depth | 570 mm (the door reaches 620 mm from the back when open to 90°) |
| Capacity | 20+2 place settings (the +2 is the fruit and vegetable basket) |
| Cavity | 150 L |
| Power | 1,750 W (220 to 240 V, 50 to 60 Hz) |
The space it goes in
| Cabinet opening, width | 600 mm (the built-in size the manual specifies) |
|---|---|
| Cabinet opening, height | 780 mm |
| Cabinet opening, depth | 580 mm or more |
| Hole in the cabinet base | 70 x 70 mm (beside the machine, for the hoses and the cord) |
| Socket | 10 A, earthed (in the cabinet next to the machine, never behind it) |
| Water inlet | G1/2 angle valve (thread at least 10 mm; mains pressure 0.04 to 1.0 MPa) |
| Drain | 40 mm standpipe (the hose needs 280 mm of it) |
| Hose reach, to the left | Inlet 1,400 mm, drain 2,000 mm (the cord reaches 1,100 mm either side) |
| Hose reach, to the right | Inlet 1,000 mm, drain 1,700 mm (measured from the side of the machine) |